We will reply to your message within an hour.
Used to mount panels, signs, and dispensers, this foam tape absorbs shock and provides high strength holding power on rigid surfaces.
Tape is cut into convenient discs and rectangles.
Mount lightweight signs and trim with this economical tape.
The most conformable foam tape we offer, use this tape for mounting, gasketing, and damping sound and vibration. It has adhesive on both sides.
Use this tape outdoors for sealing and mounting signs and security control panels.
Remove mounted objects from most surfaces without leaving residue behind.
Prevent the spread of fire while sealing, cushioning, and damping vibration. This tape has adhesive on both sides.
Often used to install carpet, padding, and linoleum.
Use this tape for light duty mounting, as well as to splice paper, foil, film, and fabric.
Use this transparent tape for laminating, splicing, and mounting, even on hard-to-bond plastics. It has adhesive on both sides.
The clear side of this polyester tape is coated with silicone adhesive for mounting to silicone rubber, while the white side is coated with acrylic adhesive for a strong bond to metal and plastic.
Particle and residue free, this tape meets clean room requirements. It has adhesive on both sides.
This thin paper tape has a high-bond adhesive on both sides that sticks to glossy surfaces and hard-to-bond plastics.
Create strong, permanent bonds that can replace mechanical fasteners.
Use this clear tape for strong, invisible bonds.
The acrylic adhesive on this tape sticks to hard-to-bond materials, such as plastics and powder-coated surfaces.
This tape can withstand temperatures up to 300° F.
These foam discs and squares have extra-strong adhesive on both sides to create permanent bonds.
A permanent adhesive on one side of this tape stays put, while a tacky adhesive on the other side lets you open and close bags or reposition signs.
This tape has adhesive on both sides and can be removed and repositioned without leaving residue behind. It meets clean room requirements.
For use in clean rooms, this tape won't leave residue behind.
Twice as strong as our standard reinforced strapping tape for extra-heavy loads. Fiberglass fibers run along the length.
Fiberglass fibers run along the length of this general purpose strapping tape.
Use this tape for light duty bundling and strapping. Fiberglass fibers run along the length.
For added reinforcement, fiberglass fibers run the length and width of this strapping tape. It forms stronger bonds than our other reinforced tape.
This tape has a high-bond adhesive that won't leave residue behind so it meets clean room requirements.
Wrap this tape around carbon fiber and other composite parts, then heat to 150° F. Tape shrinks to squeeze out air bubbles and apply pressure so parts cure without voids.
This uncoated tape is thinner and more conformable than our other repair tape to reinforce irregular shapes.
Use these tapes for light duty mending and holding.
Temporarily mount drawings and blueprints —this tape releases cleanly without damaging paper.
This tape has an aggressive adhesive that adheres to super-slick surfaces, such as plastic and nylon.
Use this crepe paper tape for sharp paint lines.
This crepe paper tape keeps its hold, even on 300° F surfaces.
Made of polyester plastic, this tape resists tearing in high-temperature masking jobs, such as on circuit boards and when powder coating.
Use this solvent-resistant plastic tape for anodizing and electroplating applications.
Aluminum foil is laminated to a tough fiberglass cloth to form a high-strength, reflective tape that resists temperatures up to 500° F. Use it for flame-spray masking and wire harness heat shielding.
Use this tape to wrap and splice cables, mask components while soldering, or as a 3D printing surface.
Use these convenient cut shapes to mask holes, fastener heads, and small areas while soldering.
At half the thickness of our other masking tape for electronics, this polyimide tape conforms easily to components.
This vinyl tape meets clean room requirements and won't leave residue behind. It comes sealed in a plastic bag.
Outline and draw attention to safety zones and hazards with this tape.
Made from stainless steel, this noncorrosive, nonstaining, and nonmagnetic tape bonds to metal. Patch scratched coatings and finishes to prevent corrosion in marine, food-processing, and nuclear applications.
Protect parts from radiation, X-rays, moisture, dust, and chemicals during electroplating and similar processes.
Reduce rattles and squeaks between parts with this abrasionresistant flocked tape. The acrylic adhesive sticks even on hard-to-bond plastics.
Seal out light to mask LEDs and prevent backlight bleed on LCD monitors with this opaque polyester tape.
Protect signs posted on windows, glass, and other surfaces from debris and moisture without obstructing clarity.
Insulate wire and cable splices, wrap wire harnesses, and repair cable jacketing with this stretchy tape.
Made with fiberglass for durability and abrasion resistance, this tape also withstands high temperatures.
Use this rubber tape to splice cable in high-voltage applications.
This traditional black cotton electrician's tape provides an abrasion-resistant shield for wrapping low-voltage splices.
This chemical-resistant tape has adhesive on both sides.
At only 0.0025" thick, this tape combines conformability with durability and abrasion resistance.
This puncture- and cut-resistant cotton tape is coated with a high-grade electrical-insulating varnish. Also known as cambric tape.
Use this tape to modify printed circuit boards, shield components, and prototype wiring-board layout and design.
The adhesive on this conformable aluminum foil tape is electrically conductive for use on surfaces that can't be soldered. Use it to shield cables and electronic components from EMI (electromagnetic interference).
A coating on this polyimide tape minimizes ESD (electrostatic discharge) when unwound from the roll and also during removal.
Our most slippery tape, the slick surface allows items to glide smoothly over it.
This tape provides a slick surface along with excellent resistance to electrical current.
Low-Friction Tape Shapes Made with Teflon® PTFE.
Also known as skived tape, this low-friction tape stretches to conform to irregular surfaces.
A strong, thick layer of Teflon® PTFE makes this tape tougher than standard Low-Friction Tape Made with Teflon® PTFE.
Cover chutes, packaging lines, and slides with this tape for a slippery, nonstick surface that resists abrasion and impact.
Protect small parts with these slippery UHMW rings, discs, and squares.
Use this slippery PTFE-coated tape for a smooth release on heat sealers and molds.
Fiberglass is laminated with Teflon® PTFE for a slippery, durable tape with excellent chemical and temperature resistance. Use it as a release surface on heat sealers and blister forming equipment.
Highly resistant to impact, tearing, and corrosive chemicals, use FEP tape to line chutes and hoppers and to cover shelves in laboratories.
Often referred to as Rulon and bearing tape, this self-lubricating PTFE tape provides better abrasion and wear resistance than our standard slippery PTFE tape.
Also known as roller tape, this tape is coated with silicone to grip smooth surfaces and resist sticky substances, such as ink. It adheres to itself without adhesive.
Apply this glue like tape for a no-mess alternative to liquid adhesives, hot melts, and staples. Also known as adhesive transfer tape.
The 3M VHB adhesive on these rolls offers a strong hold that can replace rivets, spot welds, and other permanent fasteners.
This silicone glue withstands temperatures up to 500° F.
Use these glue rolls with 3M dispensing guns.
A combination of moisture and chemical resistance makes this hook and loop a good choice for most applications.
These convenient squares and discs have an adhesive backing.
A high-tack rubber adhesive on these hook and loop strips sets quickly in moist conditions.
Each connector on this hook has two gripping heads for super-strong holding power.
Both the hook and the loop meet MIL-A-A-55126.
Stretch this elastic loop over objects for a secure hold.
Mushroom-shaped heads interlock for a secure hold when two pieces are pressed together.
When two parallel strips are pressed together, these fasteners are about one-third to one-half the thickness of other snap-together fasteners.
Fasteners are cut into convenient rectangles and discs.
Cut to wrap around any size bundle.
Tear off 6", 8", or 12" lengths of this hook and loop.
Create custom-length ties from a roll with hook on one side and loop on the other.
Able to fit small bundles, these thin ties are more flexible than other ties.
These ties are flexible, reusable, and adjustable for delicate bundles or bundles that frequently change in size.
These ties meet UL flammability requirements.
Flexible enough for small bundles, these ties are often used for electronics.
Quickly attach and detach a bundle.
Route and organize wire, cable, and hose along your DIN rail. Unlike zip ties, these cable ties can be temporarily undone to add or remove material.
Level dies, plates, presses, and other machine tools—this shim tape conforms to curves and uneven surfaces.